How to dye a fur collar. How to easily dye the fur of arctic fox, mink, silver fox, fox at home

Often a favorite fur coat or vest loses its appearance, although other characteristics are still quite excellent. The fibers fade, become dull and give the product a very worn look. If you want to enjoy the warmth and comfort of your favorite thing, then you can shade it a little. But not everyone knows how to dye arctic fox fur at home.

You don’t have to bother with painting it yourself, but rather take the product to a special workshop, where everything will be done quickly and professionally. But the cost of such a service is often prohibitively high. It will be much cheaper to learn how to dye natural fur at home and do this work yourself.

Important: Please note that if the product is still new, it is strictly not recommended to dye it simply to change the color, since any dyeing of fur shortens its service life.

Each type of fur is beautiful and original in its own way. The painting of each of them also has its own characteristics:

• White rabbit, chinchilla or mink fur is the easiest and simplest to dye, because it does not require pre-lightening. You can use any color that can cover the yellowness that appears.

Tip: Keep in mind that rabbit fur is very sensitive to chemicals, so it must be dyed with extreme caution.

Preparation

In order for you to get a very good effect, the fur product must be prepared for painting. Then the paint will apply much more evenly and there will be no bald spots. The most important thing is to thoroughly clean your fur coat or vest. To do this, you need to prepare a mixture of the following substances:

• 2 tbsp. l. salt;
• 1 tbsp. l. ammonia;
• 2 tbsp. l. soda;
• 1 tbsp. l. washing powder;
• 2 liters of warm (not hot) water.

All components must be mixed and the resulting mixture carefully applied to the fur. Lightly brush the bristles so that not only the top, but also the bottom part is cleaned. Then moisten a clean cloth with water and wipe the fur from the composition.

After such cleaning, the fur must be dried naturally, without using heaters or a hair dryer. It is also not recommended to leave the product exposed to direct sunlight.

How to paint?

How can you dye fur? This is a completely natural question that arises among many people who are puzzled by the question of how to dye mink, rabbit or arctic fox fur at home. Of course, there are several very realistic home dyeing technologies.

Professional product

You can use special paint for fur, which is sold in hardware stores. It lies very naturally on the fibers, as it is designed taking into account the characteristics of animal fur.

Hair dye

A more affordable option is hair dye. This is also the most popular coloring method, because you can choose any color from a huge palette.

Important: Keep in mind that fur should always be dyed in a darker shade. Over time, the fiery red color will turn to “rusty” or red, and the black color will fade to a dirty brown.

So, how to dye fur at home using hair dye:

• mix all paint components according to instructions.
• put on gloves.
• treat the inner skin (skin) with baby cream, glycerin or petroleum jelly to prevent it from drying out;
• wet the fur so that the paint is distributed more evenly;
• apply paint with a brush to the entire fur surface;
• remember the fur a little with your hands;
• wait 35-45 minutes;
• wash off the paint with water;
• lay the item on a horizontal plane, squeeze out excess moisture with your hands, and leave to dry;
• After drying, comb the fur.

You can not dye the entire fur, but only the tips of the fibers. Typically, they are lightened to give the product a richer appearance.

Suede paint

You can treat the faded tips of the fibers with suede paint, which is sold in aerosol cans. To do this, place the spray can at a distance of at least 0.5 meters from the item and evenly paint the entire surface. Leave the fur to dry for a while and then rinse it thoroughly. After this, prepare a fixing solution: 5 tbsp. l. vinegar per 2 liters of water. Wipe the pile with this liquid and leave it to dry.

If a fur item is already dark, but you would like to dye it a bright and rich shade, then you can bleach the fur. Hydrogen peroxide tablets or hair lightener will help with this.

Peroxide is diluted with water in a ratio of 1:3. If you use clarifier, dilute it as written in the instructions. Different manufacturers may make different concentrations of clarifiers. Apply the prepared mixture to the fur and leave for 10-15 minutes. You cannot keep the composition on the pile longer, as the hairs can become brittle. After treatment, rinse the fur with water and dry naturally. It can be painted only after it has completely dried.

When deciding to lighten and dye fur, carefully select the color, because it will be undesirable to carry out these procedures again. Not a single piece of fur, even the highest quality, can withstand repeated dyeing.

When dyeing fur, it is important to know some nuances:

• The fur you decide to dye should not be too shabby.
• Only clean fur will dye well, so it must be cleaned first.
• The yellowed white fur of the Arctic fox can be simply lightened.
• Before using any dye, be sure to test it on an inconspicuous area of ​​fur.
• When painting, you can hide some flaws and defects.
• Instead of full-fledged paints, sometimes you can use small folk tricks. For example: the fur of a red or steppe fox can be quickly and painlessly renewed using a strong solution of potassium permanganate. In this case, use a small sponge. It needs to be dipped into the solution and passed over the villi, being careful not to touch the core.
• After dyeing and drying, the fur must be combed so that it becomes fluffy again.
• Using tinting shampoo, you can create a unique decor on your fur product. You just need to show a little imagination.

Now you know whether it is possible to dye the fur of the Arctic fox and other fur-bearing animals, and you can also imagine the technology of this process. The main thing is to strictly follow all instructions. And your favorite and cozy fur coat will delight you with its warmth and impeccable appearance for some time to come. If you do not dare to take such an important step as dyeing fur, then contact specialists at a dry cleaner or workshop for repairing fur products.

Do you have a fur item lying around in your wardrobe that has long gone out of fashion? It would be a shame to throw away clothes made from natural fur, so you can breathe a second wind into them. To do this, the product should be painted or restored to its original color.

There are several ways to dye fur at home. To do this, you must first clean it of traces of dirt and grease. Prepare a foam from liquid soap and water and apply it to the surface of the skin. Try to prevent moisture from penetrating the inside. Rub a little in the direction of hair growth and rinse with a damp cloth. To dry, straighten the product on a hard surface and secure the item. The product must be in a stretched state. After complete drying, you can begin painting. Want to lighten your fur? In this case, use hydrogen peroxide. It is necessary to apply a 10% solution to the product using a sprayer. After this, leave the solution for 30-40 minutes. Rinse off the peroxide with water. Do not under any circumstances throw away wet fur; it must be dried in a stretched form on a hard surface, so it will not lose its shape. Remember, after bleaching with peroxide, a mink acquires a yellow tint, and a beaver becomes red. If you want to dye the skin a dark color, use hair dye. It is best if it is made on the basis of ammonia. Using a brush, apply cream paint of the selected shade to a dry and clean product. Leave the mixture on your hair for 30 minutes. Rinse under running water. Dry the product by stretching it. It is recommended to dye outerwear made of natural fur in shades one tone darker than the current one. Want to make your faded Arctic fox fur look modern and beautiful? In this case, the gray skin must be washed with shampoo and dried. To make the wool shiny, rinse it with a vinegar solution. To prepare a mouthwash, dissolve a tablespoon of vinegar in a liter of water. After drying the product, lay it out on a flat surface and secure it with clips. Make several holes in the plastic bag in a checkerboard pattern. Place the bag on the fur and use a crochet hook to pull the strands through the holes. Shake a can of black suede paint and apply it to the wool. After drying, remove the cellophane and comb the product. The result will be a highlighted arctic fox. Now all down jackets are decorated with fur dyed in this way. After dyeing, rinse the fur well and pour a vinegar solution over it. You can apply hair balm, it will add shine to the product. Don't skimp on purchasing paint. Buy products from well-known and trusted manufacturers. If you want to make your fur several shades lighter, use a lightener. Household chemical stores sell Blondoran and Supra formulations. They lighten hair perfectly. Do not leave the mixture on your hair too long, as it may become damaged and brittle. As a result, all the fur will fall out of the flesh.

Don’t save money; take the fur to a dry cleaner or atelier. Such organizations know how to handle natural fur and suede.

Natural furs are always in trend. A beautiful fur coat serves as a decorative element and at the same time a practical item for protection from low temperatures. Mink has been popular at all times, and the demand for such products does not fall even today. Many people are interested in whether it is possible to dye a white mink coat and how to care for fur clothing so that it does not lose its solid appearance.

Dyeing a white mink coat

Mink coloring features

The structure of mink products is as close as possible to human hair, which means that you can successfully transform them using high-quality hair dye. It is advisable to use a safe, long-lasting product that has already been tested on your curls. Most gentle paints from reputable manufacturers are suitable for working with delicate natural fur.

Fur dyeing technique

Typically, fur coats are repainted at home using a spray bottle. It is necessary to maintain a distance by placing the container with paint 50-70 centimeters from the surface to be treated. When applying the product, you need to additionally distribute it using your palms or a comb. This approach will allow you to quickly remove excess dye and achieve a uniform tone over the entire area of ​​​​the clothing.

Drying a fur coat

After dyeing, the fur product must be properly dried. This final stage should be carried out carefully and without haste. This task can be accomplished using a household hair dryer. During the process, you need to continuously comb the pile. Do not neglect thorough drying, as otherwise the fur may take on an unaesthetic appearance.

Treating fur with balm

According to the experience of resourceful women, hair balm fits optimally on the mink. This cosmetic product gives the fur softness and a new shiny look. It is important to use quality products.

Professional dyeing of fur coats

If you are not confident in the impeccable result of dyeing fur at home, then you should not take the risk. You can renew a mink product with the help of dry cleaning specialists. Experienced workers will be able to select a special dye that will give the desired shade, and at the same time provide a guarantee for the complete safety of the fur.

Mink dyes

If you are dyeing a fur coat for the first time, then it is better to follow the recommendations of experts. They say that the best results are obtained from paints sold under the Prestige and Fara brands. When the operation is performed correctly, the fur will remain bright and beautiful for several months. After prolonged use, the color may fade. Not all colors are available for mink, but only noble chestnut, strict black and the most spectacular of them - red. It is the latter option that promises to be the most attractive and last as long as possible. Black color is also in demand, but the tone may become dull over time and acquire a brown tint.

Inexperienced women should better prepare for the procedure by watching video tutorials on the relevant topic. Preliminary receipt of information on updating fur and studying the common mistakes of others will help prevent damage to the product. Here's an interesting idea: you can use a stencil and get an original leopard print color. So, now we have figured out whether it is possible to dye a white mink coat and we know for sure that this is quite feasible if all the rules are followed.

Mink coat: beautiful and practical outerwear that can be quickly updated by dyeing the fur

How to care for a white mink coat?

Properties of a white mink coat

A new snow-white mink coat is dazzlingly beautiful, but after a while it inevitably takes on an ugly yellowish tint. Such a product does not radiate luxury; a woman in it looks unkempt. To refresh a fur coat and bleach it efficiently, it is better not to use folk remedies; there are dry cleaners for this purpose. It is possible that a slight yellow coating can be removed using improvised means, but in advanced cases only special chemicals will help.

Safe use of a white fur coat

In order to extend the life of mink fur, the product should be treated as follows:

• avoid contact of fur with perfume, the product may cause yellowing;
• even if there are no noticeable defects, the product must be taken to professional dry cleaning annually for preventive purposes;
• when the fur has been damaged by rain or snow, you should not dry it near heating devices, just hang the product in a warm place;
• it is necessary to protect the fur coat in every possible way from rubbing vulnerable areas, such as pockets, shoulders, cuffs; it is recommended to minimize the wearing of watches, bracelets, bags with a shoulder strap, and piercing the fur with pins and brooches;
• When driving your car, it is better to prevent the mink from coming into contact with the heated seat, otherwise yellowing may appear.

With proper care, a white natural mink fur coat will last about ten years. If you want to buy a light fur coat that will look great even after prolonged wear, then you can give preference not to a pure white product, but to pleasant shades. For example, beige, palomino, lavender, melted ice and pastel are fascinatingly beautiful colors of natural mink, on which yellowness is not noticeable at all.

Do you have clothes made of fur, but you are tired of them, you don’t like them, the fur is worn out and faded? Don't rush to throw it away! It can serve you for another year. You just need to update the product a little. How? Read below.

Where to dye fur?

This may be the first time you've heard, but fur can be dyed, even after it has been worn for many years.

This can be done either in a special salon or dry cleaner, or independently, at home.

How to dye fur at home?

First of all, inspect the fur and the inner side (the so-called underside). If the first one looks dirty, and the second one is hard and dry, then the product must be washed before dyeing.

To do this, rub fatty sour cream or kefir into the flesh with a cotton swab (repeat the procedure several times). As a result, it should become soft and elastic.

Wash the fur with shampoo for oily hair or laundry soap. It is not recommended to vigorously rub the fur so as not to damage it.

Dying fur at home is easy if you follow the technology. If you plan to remake or alter the product, then it is better to unstitch it in advance.

Most often, fur is dyed in dark colors (black or brown), as they ideally hide unevenness of the coat, coloring, defects and blemishes.

In addition, it is advisable to repaint the fur a tone darker than the natural color. However, if you want to do something exclusive or unusual, then a lighter tone or tinting is allowed.

Mouton products can be dyed brown and black. From astrakhan to black. Brown, blue and gray mink fur can be given the same, but more intense shade.

Pastel, beige, pearl tones of fur are ideally dyed brown.

The furs of red, black-brown, silver-black foxes and arctic foxes are perfectly dyed into gray, red and blue. Fur dyeing should be done in a deep plastic container.

Of course, you have a question: how to dye fur?

Dyeing fur at home is a fairly simple procedure. This is where your own hair coloring skills will come in handy.

You will be surprised: to dye a fur product you can use an ordinary thing - hair dye. It is better to purchase several packages, as one may not be enough.

Before starting the procedure for applying hair dye, it is recommended to lightly wet the fur with water so that the dye can be easily distributed (it is prepared according to the instructions).

The paint must be applied quickly. It is convenient to work with gloves: this way you can thoroughly rub the paint. The duration of dyeing depends on the desired shade (usually indicated in the instructions).

At the end of the dyeing time, the fur should be rinsed in water with vinegar added, and then blotted with a towel.

The fur needs to be dried in natural conditions; it must first be stretched on a hard surface with the nap facing up and secured with pins.

It’s quite easy to renew fox fur with a saturated (dark brown) solution of potassium permanganate, which is convenient to apply with a sponge; there is no need to wet the fur. As a result, the fur will acquire a rich, bright red color.

More

The portal contains addresses and telephone numbers of Moscow studios where you can order fur dyeing. Prices for the service are presented in tables convenient for comparison. Thus, you can compare the cost of services in different studios and find the best option. The portal contains reviews from visitors who have already contacted the studio or salon. This will help you find really decent seamstresses and tailors.

Which studio in Moscow is best for fur dyeing?

Fur dyeing helps restore the former beauty of hats, fur coats and fur capes, eliminates yellowing and fading, and renews the appearance of the product. If the fur on an old fur coat is well-made, but the color has already become ugly, it is better to turn to a good craftsman and carry out restoration, rather than throw it away or put it in a distant closet. Where can you dye fur with high quality, and how much will it cost?

Prices for painting fur and deadlines for completing the work

In the studio, a fur product is dyed in different ways, the most expensive is a gradient, and the cheapest is tinting. In the first case, two-color painting is used; not every master can make a beautiful transition between colors. For complex work, you should not skimp on a specialist. A simple option is tinting, which simply gives the fur a more saturated shade and restores its shine. Such restoration can be ordered at any specialized studio for working with fur products.

The average prices are:

• Toning: from 1700 rub. for hats, from 1500 rub. for collars and cuffs, from 3500 rub. for vests and capes, from 5000 rub. for fur coats
• Coloring is calculated individually, but if there is no color change, then prices are approximately 100-200 rubles. more expensive than tinting.

Dyeing natural or faux fur takes a little time, on average 1-2 hours, it depends on the skills of the artist and the area of ​​the product. It is faster to dye a small hat than a large, voluminous fur coat.

Unfortunately, in many studios in Moscow there are queues of clients, especially for competent furriers, so it is better to make an appointment in advance. In the table you can find the company closest to you, its opening hours and contact phone number.

What is important for the customer to know?

There are a number of cases when companies refuse to paint a client, and this is due to compliance with technological standards. The restoration goes like this:

• The lining is ripped out and the condition of the fur is checked. If the reaction is normal when moistened, then the item will be taken to work; if the subcutaneous part of the skin begins to peel off and deform, then the master will refuse. Most often, they do not take into work products that are more than 15 years old.
• It happens that after painting there is shrinkage, and you need to recut it according to your figure. The specialist should warn about such things, since for the client this is from 2 to 10 thousand additional expenses.