Cats from small pieces of plasticine. How to mold a cat from plasticine

If you are thinking of sculpting a cat figurine, but are at a loss and don’t know how to complete it, the information below will help you figure it out. In this article, several schemes for making a cat will be proposed, differing in the degree of complexity and methods of forming the figure.

A selection of video lessons

This article will present a selection of videos in which young masters share their secrets. In addition, it will be shown how to make a monster high cat.

How to make a cat out of plasticine: a step-by-step master class for beginners

To work, you need plasticine in white, pink, green and black.

First of all, it is necessary to form all the main components of the part from plasticine. From white color form three balls different size, a large ball is for the body, a medium one is for the head, a smaller one is for the tail. You also need to roll up two small balls to indicate the mustache and ears. In addition, you will need twelve tiny balls in order to get the pads on the paws. It is also necessary to form green and black balls for the eyes and pink for the nose and mouth. The essence of this technique is that you first need to form all the constituent parts, and then assemble them into a single structure.

After all the details are ready, you can start assembling. First, you need to attach a mouth to a medium-sized workpiece, that is, attach a mouth to the head by rolling a roller out of half a pink ball, and make a nose out of the second piece and attach it to the head. Two green balls should be attached instead of eyes and supplemented with black balls. From one white balloon it is necessary to form a cone-shaped part, flatten it and divide it into two, thereby obtaining two ears. Another ball must be rolled into a thin sausage, divided into six segments and attached to the head as a mustache.

In order to form the body, it is necessary to fashion a roller from a larger white ball and make cuts on both sides. Incisions are needed in order to get paws. Attach tiny white balls to each paw as pads. Then you should attach the head to the body with a toothpick and attach the tail. The process of making a cat figurine is shown in the photo.

Puzy cat

The scheme for sculpting such a cat is quite simple, so even the youngest craftsmen can figure it out. To work, you will need plasticine of the main color and a little white and black.

First of all, a piece of plasticine must be divided into two unequal parts, then an oval part should be formed from the larger part, narrowing the upper edge and expanding the lower edge. From a smaller piece, you need to roll a roller in order to get a tail. You also need to make two identical balls for the paws and two triangular-shaped parts for the ears. On final stage it is necessary to form a circle from white plasticine and attach it to the head, supplementing the circle with a black ball to make a mouth and nose. From above, you need to attach two green balls as eyes, complementing them with tiny black balls. In order to get a mustache, you need to roll out thin sausages from black plasticine.

How to make a cat out of plasticine and toothpicks

This article will also present a scheme, focusing on which you can mold both a cat and a dog, the main thing is to learn the basic principles of work. To work, you will need plasticine and toothpicks.

1. A rectangular piece of plasticine must be cut into three parts.
2. A ball should be formed from one piece, then to make a body out of it. From the second piece you need to roll two balls, one for the tail, the other for the head. From the third piece it is necessary to form six identical balls.
3. One ball must be shaped into an oval, paws should be rolled out of four identical small balls, two triangles for the ears must be made from the fifth small ball, and the sixth ball must be divided into three pieces.
4. Then the torso must be attached to the head with a toothpick, then ears, tail and paws should be attached, make eyes.

print Thanks, great lesson +69

As soon as children see a little kitten, they want to cuddle this soft lump to themselves, stroke and play with it. Yes, the kittens themselves are not against it, because they behave like children. They are interested in everything that happens around, they chase insects and birds, play with a ball or a skein of thread. In this modeling lesson, we suggest you mold a kitten from plasticine, reproduce the cute features of a small animal.

The step-by-step photo instruction below will help solve the problem of sculpting. In general, sculpting a kitten is not difficult. it ordinary cat, only his appearance should be more naive and childish.

Other lessons on the topic of cats:

Step by step photo lesson:

Think about what kind of clay you would like to use to sculpt this animal figurine. It is not forbidden to use even caramel pink color, because you have a toy kitten. In this lesson, we will focus on the banal gray version, but no one limits young sculptors in choosing a color. Roll a ball from a small portion of the mass for modeling.

First, press the ball against a hard surface with your palm, then, pressing it with a large and index fingers, stretch the cheeks in different directions.

On the cheeks, make a stack of notches, attach the bow.

Stick on huge naive eyes, a pink nose. Now the baby can sniff everything.

Make your eyes green, the cat will watch the world around him with interest.

From plasticine of the same color, form triangles-ears and attach them to the corresponding recesses. Curious cutie should hear everything.

To make a kitten torso sculpture, prepare a large number of gray plasticine. Bend a large lump with an arc.

Cut out the bent hind legs with a stack. Stick a beige collar on the front and make it soft and fluffy with a stack. Insert a match immediately where the head will be attached later.

Cut out the front legs in the same way.

Attach the head to the body using the previously prepared match. Attach a fluffy tail to the back and bend it forward.

A cute plasticine kitten is ready. The craft will become strong if it is placed in the refrigerator for a while, and the shiny appearance will appear on the product if it is sprinkled with hairspray.

Modeling helps kids develop fine motor skills and Creative skills. Parents can show how to mold a cat from plasticine, and the child will repeat after them. It is better to start with a simple sample, and then create small plasticine sculptures that will look like cartoon characters or become the embodiment of a joint fantasy of an adult and a child.

What you need to know before you get creative

Parents are in many ways an example for kids. Therefore, before molding a cat from plasticine, prepare everything you need. Place a smooth wooden or plastic board on the desk. Let the children see that it is impossible to sculpt on the table, explain why. After all, it will be very difficult to completely remove plasticine from its surface.

Don't forget to put on a tissue or paper towel. With them, the child will wipe his hands and the plastic knife that comes with the kit.

How to mold a cat from plasticine: torso, legs, tail

Now you can start the exciting process. Cut off the bar yellow color big and small pieces. The first will soon turn simultaneously into the body and paws of the animal, and the second into its head. Knead the plasticine, as it will be difficult for a child to do this. When the mass becomes pliable, connect the baby to the process. Let him roll a sausage from a large piece, and a circle from a small one.

Now take matters into your own hands. Slightly flatten the sausage along its entire length, cut its edges in the middle on one side and the other by a quarter. This is the basis of the front and hind legs, spread them a little to the sides.

While the child is rolling a circle for the head, you can make a tail out of a small piece of plasticine. To do this, give the mass the shape of a small sausage. Attach it to the back of your body.

Head, muzzle of an animal

A plasticine cat should have a funny head. Proceed to the formation of this part of the animal. Flatten the round head slightly around the face. To make an ear, on the left side of the crown, slightly pull the plasticine up, shape it in the form of a triangle. On the right, make the same ear.

From white or black plasticine, roll up two small balls - these are the eyes, attach them in place. The mouth can be drawn with a plastic knife in the form of a semicircle. Let the cat smile. From red plasticine, make a small semicircular tongue, attach it to the bottom of the mouth. Here's how to mold a cat out of plasticine so that the animal turns out to be cheerful and funny.

Another simple model

You can make a cat not only from plasticine, but also from polymer clay. In both cases, you will sculpt no more than 20 minutes. Take a piece of plastic mass, roll it into a circle, give the figure the shape of an egg, slightly sharpening on one side - this is the body of a domestic animal. Place the blank on the blunt end, attach two triangular ears to the opposite end. They can be made from plasticine of a different color, for example, pink. From the material of the same color, make 2 rosy cheeks, attach them in place. Roll up two pieces of plasticine in the form of a sausage, these will be the front paws, the back ones are not visible. Make paw pads from the mass Pink colour. Here's how to make a plasticine cat quickly.

In this technique, you can create not one, but two animals. Between them, place a branch created from brown plasticine, petals for flowers - from a mass of pink, a core - from red.

Realistic cat

After mastering a simple technique, you can move on to another model. Here's how to sculpt a plasticine cat to look like a real one. First, roll a thick oval out of a white plastic mass, this will be the body of the animal. The shape of the front legs will be the same. Their edges are slightly bent upwards so that the paws are clearly visible. The head is round, the ears are triangular. To make a muzzle, roll three small balls. Stick two in the center of the face, the third - a little lower, in the middle. Roll a small ball out of black plasticine, place it between two adjacent circles. This is the cat's nose. Let the round eyes be the same color.

The upper part of the hind legs is larger than the lower one, attach them in place, and then make a tail. You can please the child by showing how to mold bowls for animals, put food in them, which is also made of plasticine.

If the cat needs to be taken to Kindergarten, school, put it in a box, cover with a lid. This will allow you to conveniently bring the sculpture to the place. You can arrange a creative corner at home by placing crafts made of plasticine or other material on a specially equipped shelf. Then it will be possible to often admire the toys that the child made with his own hands, and be proud of them, showing them to the guests. A positive assessment is very important for the development of the creative potential of the baby.

Modeling crafts from plasticine helps to spend time with benefit. Figurine modeling does not just give good mood, but also develops fine motor skills, imagination, creativity, teaches to be neat. This master class is dedicated to modeling a cute plasticine kitten, you can learn how to make a plasticine kitten. step by step photos, attached to the description, make the manufacturing process understandable and visual. The craft is not very simple, with large quantity small parts, so it is recommended for children from five years old.

So, let's begin. First of all, prepare the plasticine for work. If the set does not have such a pink color as in the photo, then we get it ourselves: for this we mix a piece of white and red plasticine and add just a little bit of blue. Knead until the color is uniform, and the piece is soft and pliable. We sculpt separately large parts. We roll a large ball for the head, a slightly smaller one for the body, two balls for the hind legs, two for the front legs, we make a sausage for the tail and two triangle ears.

We attach the head to the body (trying not to deform it) and the hind legs (we flatten the balls at the ends to form a foot, stretch it a little and attach it).

We roll the balls for the front paws into sausages, thickened on one side. We attach the thin end to the body.

Attach ears and tail. It seemed to me that it is better to bend the tail up, so it will be visible from behind and the symmetry will not be broken.

We make a muzzle. We flatten two balls of white plasticine, on top of them - a black nose and a red mouth. Two green eyes and pupils of thinly rolled black stripes.

Making pillows for hind legs(again from flattened balls of different sizes).

Now the most difficult, "jewelry" work. We roll out white plasticine with a rolling pin into a thin layer. From this layer we cut out a small oval with a stack and stick it to the kitten's breast. Stretch the white with a stack so that the edges are uneven. Do the same with the tip of the tail.

A cute pink plasticine kitten is ready! You can add more details: for example, a bow around the neck, a heart in the paws or a hat. You can also make it from polymer clay, just add a toothpick as a frame to hold the shape until it hardens.

The final look of the craft.

Sculpting is not only exciting, but also a very useful thing. In the process of making volumetric figures, kids learn to distinguish geometric shapes and combine shades, develop imagination and fine motor skills. The most popular characters of creative fun are the animal. With the help of plastic material, you can easily create a figure pet or recognizable cartoon character. We bring to your attention several master classes on how to mold a cat from plasticine.

Perhaps the easiest way to make a cat out of plasticine with your own hands in a matter of minutes is to mold it from a ball.

First of all, cut a piece of plasticine the size of 2/3 of a bar and knead it in your palms.

When the material becomes soft and pliable, form a ball out of it. It will act as the basis for making the body of the figurine. Form 4 identical processes from the workpiece by pulling - 4 paws, as well as 2 processes from opposite parts of the ball - the head and tail.

Sequentially work through each detail of the figure until it acquires the desired shape. The process for the head should have a little big sizes than the rest. It ends with two triangular lugs.

Make the front legs slightly bent, the hind legs upright. Stretch the tail slightly and wrap it with a hook. To decorate the face of an animal from white plasticine, form 2 small balls. When determining the size of the eyes, keep in mind that too small will not give the desired expressiveness, and too large will give the plasticine kitten an upset or even surprised look.

Slightly flatten the formed balls of the same size and supplement them with pupils made of black plasticine sausages. To gently "plant" the eyes, use the plastic stack that comes with the kit. To make the look more expressive, form thin films of the upper eyelids.

At the final stage, it remains only to correct the shape of the ears, correct the curl of the tail and make the paws more stable.

Option 2: a cat with a curved back

This option is more complicated, since it first involves the manufacture of individual elements and only after that the assembly of the figure.

Divide the block of plasticine into 3 unequal parts: torso, head and tail. Form an oval from a large piece. Give it a flattened and slightly curved shape. To make the paws of the animal, divide the ends of the bar in half. The total length of the cuts should not exceed 1/3 of the bar.

Form paws from the separated elements. Roll a ball from a previously cut piece and form a slightly flattened muzzle with erect ears on its basis. Ears are easy to make by means of "tucks" on either side of the crown.

From the last third blank, form a sausage, which will act as the basis for making the tail.

At the final stage, it remains only to draw a muzzle. You can limit yourself to the standard version, or create a more charismatic face.

To obtain a contrasting combination when forming the cheeks and eyes of the animal, use white plasticine. Pupils are best made from a thin strip of black or green plasticine. Antennae and cilia are conveniently done by pressing the side surface of a toothpick.

Paws, if desired, can be supplemented with a “drawing” of fingers with claws. This is easy to do with the same toothpick.

Option 3: Puss in Boots

Children love listening to fairy tales and imagining what fictional characters really look like. So why not make one of them? Take the same Puss in Boots. We are sure that many children will like the idea of ​​​​creating a resourceful and sociable hero.

Having chosen the plasticine of the desired color, form 2 balls with a diameter of 2.5 cm. Separately roll up a sausage 2 cm thick and 4 cm long. To make paws, make 4 blanks in the form of sausages 1 cm thick and 1.5 cm long. The smallest ball is basis for the future ear. You will also need one blank 0.5 cm thick and 5 cm long to make the tail.

To make a hat, use plasticine in a contrasting shade. Form a cake with a diameter of 4 cm from it. Separately fashion the top of the hat in the form of a flattened cylinder. Connect both blanks.

To decorate a headdress with a feather, form an oval cake from white plasticine. Using a toothpick or a stack, make notched fringed edges. Add one end of the feather with a black thin roller-leg.

Let's start sculpting the muzzle. To do this, attach an ear flattened in the form of a triangle to the ball-head. Make cheeks from 2 white cakes of the same size. Eyes - by combining white drop-shaped blanks and green flattened balls of the same diameter. The last to fashion a black nose and mustache.

Put on a headdress on the finished muzzle and attach a white feather.

To sculpt the legs of the figurine, shod in unusual, memorable boots, take red plasticine. Make from it 2 blanks 3.5 cm long, outwardly resembling pepper pods. From brown plasticine, make flat elongated cakes - soles. To sculpt the heels, roll up the back edges of the sole.

Connect the boots with blanks for the hind legs. To make the joint more inconspicuous, form the cuffs of the tops from flat strips 1 cm wide.

A large contrasting raincoat will help to complement the image of a fairy-tale character. To make it, make a thin trapezoid-shaped cake from plasticine with a base width of 10-12 cm, in the upper part 5-6 cm with a product height of 5 cm.

From the largest sausage in size, blind the torso. Attach the lower and upper paws to it. To make the figure more stable, when docking the body with lower limbs use toothpicks.

It remains only to put a cloak on the figure, tightly pressing it to the back and back of the limbs. At the final stage, attach the head and attach the tail. To give the figure dynamism, lift one of their upper legs up as a sign of greeting.

Option 4: cute glutton cat

Why does a cat have to be depicted as a graceful animal? After all, we all know how much pets love to feast on. We will try to make one of these.

The basis for the manufacture of figures will be 6 balls of different sizes.

From the smallest balls, form 2 ears in the form of flat triangles. Attach them to your head. Smooth out seams. auricles highlight with the application of yellow plasticine.

Form the cat's cheeks from 2 white cakes of the same size. Eyes - from the same cakes, but with a smaller diameter. The nose is a black ball. Mark with black dots where the mustache grows.

The largest ball, which will act as the body, roll out a little, giving oval shape. Connect the blank to the head of the figurine. Highlight the belly area in yellow.

Attach the hind legs to the body, mark the location of the upper legs with arc lines. To highlight the fingers hind legs animal through the stack, make shallow cuts.

It remains only to make a ponytail. To do this, roll up the sausage. Attach its base to the lower back, and twist the opposite end into a spiral.

Finally, we offer not one, but three video options that describe in detail how to make a cat out of plasticine:

Making a cartoon character MeowSim:

The subtleties of making a spotted kitten: