Temperature control in modern devices. How to use an electronic cigarette: instructions

If you have purchased for the first time, or are just about to purchase a powerful battery mod, then you will probably come across the fact that it has several modes of use installed. And at first glance, it is not entirely clear which mode is needed for what and how to choose from all this the one that is suitable for you.

A little history

First, let's tell you where the various vaping modes came from. When the first battery mods first appeared, the manufacturer included in them the ability to regulate the level of output power and the level of output voltage. Accordingly, in the first mode, which was called variwatt, you could set the required indicator in watts, and in the second mode, which was called varivolt, you could set the indicator in volts.

Also, the manufacturer included a mech mod mode that was more familiar to experienced vapers, which implied that the higher the battery charge in the mod, the higher the power it produces.

A little later, a temperature control mode appeared, in which the vaper could set only a comfortable vapor temperature for him, and the device automatically selected all other parameters.

Subsequently, various modifications and varieties of these modes appeared, which we will now discuss.

Description of all available vaping modes

Today, in most battery mods you can find the following vaping modes:

Variable mode

In most battery mods it is called VW or Power. In this mode, the user can independently set the power he needs. The mode is quite easy to use and does not require any specific evaporators or winding. The only thing you should pay attention to is what maximum power your atomizer, or rather its coil or replacement evaporator, supports. You cannot set more than this power, otherwise you will feel a sharp burning taste and risk burning the evaporator.

You will have to independently select the optimal power for you, at which you will fully feel the taste of the liquid and get the best large quantity steam while maintaining taste.

Mech mode

This mode is also called Bypass. It implies that the higher the battery charge, the more power the battery mod produces. All settings in this mode are carried out in secondary ways, such as increasing or decreasing the resistance of the spiral. This mode is more suitable for experienced vapers who plan to use a battery mod with drip caps.

Temperature control mode

Thermal control mode is a relatively new mode that is now used in all modern battery mods. Its essence lies in the fact that you independently set the vaping temperature that is comfortable for you in a certain range, and the electronics select all other settings to suit the temperature you choose.

At first glance, everything is simple, but this mode has a peculiarity: it only works with evaporators and windings of a certain material. Therefore, today there are three types of temperature control modes:

TC-Ni – thermal control mode using nickel winding. In other words, if you want to use this mode, then you need to install a replacement nickel evaporator.

TC-Ti – thermal control mode using titanium winding.

TC-SS316 – thermal control mode using stainless steel winding.

Between themselves, these materials differ in different flavor transfer and the level of steam produced. The mode itself is great for beginners, because... Due to the fact that the electronics automatically selects all parameters, the possibility of accidentally getting a burnt taste is practically excluded.

TCR mode

TCR – temperature coefficient of resistance. This mode is a type of temperature control mode. It was introduced to support a variety of coil materials and fine tuning when using temperature control. In this mode, you can set this coefficient and select the best ratio for the spiral material you have chosen.

The TCR mode is designed for more experienced vapers and is suitable for those who use drip caps or serviced atomizers.

START mode

This mode was developed by Joyetech specifically to work with replaceable BF type evaporators. This mode is designed specifically for beginners and assumes that when selecting this mode, the electronics will automatically set the maximum acceptable indicator power. And you will be able to choose the optimal one for yourself within this indicator.

First, find out what modes your chosen one supports. If your mod supports temperature control mode and the atomizer comes with suitable evaporators, then we recommend starting with this mode. This way you can start vaping without any unpleasant tastes.

If this is not possible, then you can select the standard variable watt mode and set a low power, for example 10 watts. Then increase it little by little and try it. This way you can choose the best option for yourself.

In any case, don't be afraid to experiment and try something new.

Smokers rejoice! You no longer have to run outside in the rain and frost to get your dose of nicotine. Electronic cigarettes can be smoked anywhere – even on airplanes and in non-smoking sections of restaurants. This is completely legal - because e-cigarettes do not burn and do not pose the danger of secondhand smoke. They produce harmless, odorless vapor (unless you take into account flavorings) that dissolves in the air in just seconds.

New e-cigarettes/cigars/pipes can be purchased primarily online – or for a little more money in retail stores. The principle of operation of all of them is very similar, but the characteristics can vary quite a lot. Electronic cigarettes do not contain more than 4,000 chemical substances, which can be found in tobacco smoke emitted by “analog” cigarettes. Electronic cigarettes are not that expensive - you will have to pay a lot at the very beginning, and then just buy fairly cheap spare parts and consumables as needed. A typical e-cigarette starter kit includes 1 – 2 batteries, 1 – 2 atomizers, Charger(for wall outlet and/or USB), and several cartridges (usually five or more). Usually the kit also includes a manual - usually not very detailed, but containing all the basic instructions for using and servicing such a cigarette.

The concentration of nicotine in the cartridge may differ - much like in nicotine patches and chewing gum, which are already familiar to the consumer. Electronic cigarettes, in contrast, are not officially a means of combating smoking - although they are used for this purpose by a very large number of their users. You can smoke them anywhere - this is good way fight smoking bans.

Complexity:

Below the average

Instructions

Starter kit with electronic cigarette
Cartridges
Bottle with liquid for electronic cigarettes

The main components of an electronic cigarette: cartridge, atomizer, battery

If you have never used electronic cigarettes before, we advise you to carefully read the user manual. Don't forget to charge the batteries first. After this, the electronic cigarette can be collected.

Wash your hands thoroughly and place a clean rag or towel on a flat surface. This is especially important if you are planning to fill your cartridges yourself. Carefully lay everything out on your napkin or towel. If you ordered something additional, besides the starter set, post it too. If you are going to refill the cartridges yourself, you will also need a toothpick, or a syringe (thick), and tweezers.

If you are planning to refill the cartridge yourself, now is the time to do it. To do this we need an empty cartridge, a bottle of liquid, and tweezers.

We take the battery and atomizer. There is a thread there - screw the two components together, do not press too hard. Make sure the thread is straight.

If there is a button on the side of the battery, it will not turn on automatically. It will need to be clamped to work. Do not clamp it for longer than five seconds - you may damage the atomizer.

Cartridges ( different colors and models)

Open the box with cartridges. Both empty and pre-filled cartridges are initially sealed with a special rubber gasket. It is called a “condom” among electronic smokers; it is better not to throw it away - it may come in handy later.

Remove the rubber gasket. Be careful not to accidentally pull out the fleece from inside. It should not touch the atomizer. If you accidentally pull it out a little, take a toothpick, a blunt syringe or tweezers, and push it out. Do not push too hard - the material should be flush with the edge of the cartridge.

We take the battery with the atomizer connected to it in one hand, and push the cartridge into the atomizer with the other hand. Don't push too hard. Sometimes you need to turn it slightly, if you do this, hold the atomizer and battery, otherwise you may accidentally damage the wires inside the atomizer. In this case, you will have to throw it away.

*If you refill the cartridges yourself, open the cartridge, make sure that the cotton wool remains inside, and then drop one drop of liquid from the bottle inside. As soon as a “puddle” begins to form on top, stop. You can use a syringe - fill it with liquid, insert it into the filler, and press. If you overdid it and you get a puddle on top, you need to remove it, otherwise you can flood the atomizer. This is done using a regular napkin, or even with the same syringe - to save it.

Next we have a regular refilled cartridge - insert it into the atomizer; we told you how to do this earlier. It is better not to twist the atomizer while doing this - you can damage it very easily. If it’s damaged, you’ll have to use another one (you included at least two atomizers in your first order, right?).

The electronic cigarette is now ready to use. It's time to try smoking it - we use “smoke” here purely conditionally. In fact, when using an e-cigarette, nothing is burned - so this definition is purely technically incorrect.

There are manual and automatic batteries for electronic cigarettes. If there is a button on the side of your battery, then it is manual. To work, you will need to clamp it. It is not recommended to do this for longer than 5 seconds - you can burn the atomizer. Steam can be retained in the mouth and lungs - just like smoke from regular cigarette. Many people deliberately keep it in their lungs longer so that more nicotine is absorbed. Some do not inhale at all, and only hold it in the mouth - some amount of nicotine is still absorbed by the mucous membranes.

Automatic batteries work using a special sensor that detects when you start taking a puff and turns on the battery. It is recommended to do a short preliminary puff on them - to warm up the atomizer, this improves the quality of the resulting vapor.

Be careful - try not to overheat the atomizer, this applies to both manual and automatic batteries. High temperatures can cause the coil - the heating element inside the atomizer - to break, after which it will have to be thrown away. We recommend purchasing at least two spare atomizers - this is the most fragile part of the electronic cigarette, and it is especially often broken by novice users. Many stores provide a guarantee on atomizers and batteries - you can try buying them there. An atomizer can last only two weeks, or maybe six months, it doesn’t happen every time, like a light bulb.

The cartridge will sooner or later begin to run out - the amount of steam may decrease, and a burnt taste may appear. How can we help this? You can simply open the cartridge and drop a few drops of e-cigarette liquid into it (as we already did when refilling it). Another option is to simply replace the cartridge with a new, full one.

If you decide to refill the cartridge (this reduces costs), it is recommended to remove the filler from it every few days and rinse it under running tap water. It's best to do the same if you change the liquid/flavor. And don’t think that if you mix tobacco flavoring and cherry, you will definitely end up with tobacco + cherry – you may also end up with something quite unpleasant in taste. Many stores offer a liquid that does not contain any flavoring at all; flavorings can be purchased separately. You can even use regular food flavorings - the main thing is that there is no sugar and essential oils. You can, for example, mix cola flavoring with cherry flavoring - you get something like Coca-Cola with cherry flavor. There are a huge variety of flavors - from mango and banana to tobacco, menthol and various spices. Tobacco aromas, it should be noted, unlike tobacco smoke They disappear very quickly and do not leave behind heavy odors. Passive smoking as such does not exist in the case of electronic cigarettes. Tobacco flavors, including (more or less accurately) imitations of popular brands like Marlboro, Virginia Slims, Winston, 555 (UK), and others, including menthol, are obtained through the use of harmless flavors - harmless both to the smoker himself and and for those around you. Today, many e-cigarette users mix their own e-liquid – many even sell it later.

Over time, all spare parts, even the battery, will require replacement. The duration of their operation depends on many factors: quality, frequency of use, compliance with the operating instructions, e-liquid used, frequency of cleaning and service, and others. Scale gradually forms on the heating element in the atomizer, like on an electric kettle - it can be removed, there are a lot of ways, not all of them work. You can either use a new cartridge each time or refill it yourself. Over time, the fleece will become unusable - it can be replaced. The lifespan of the cartridge is limited, provided that the filler is replaced, only by the wear of its body. Sooner or later it will have to be replaced.

Despite this, using e-cigarettes does not cost much more than buying regular cigarettes. At the same time, electronic cigarettes are safer, and even allow you, if desired, to very easily reduce the amount of nicotine you receive - you simply use cartridges with a lower concentration of this substance. There are even cartridges and liquid that do not contain nicotine at all - only flavorings.

Most electronic vaping devices do not function automatically. The case contains an activation button that provides access to the battery. The exception is disposable supermini and mini devices, which turn on with a regular puff.

How to turn on an electronic cigarette is easy to understand. Manufacturers meet the needs of users halfway and implement the same scheme. To turn on the device, you need to press the button 5 times. The vape is turned off in a similar way: just quickly press 5 times and the cigarette will flash, which indicates the deactivation of the battery.

Why turn it on and off?

Beginner vapers do not understand why an electronic cigarette should turn on. This is extra hassle: it’s much easier to vape immediately after pressing. Deactivation is important the following reasons:

How does the activation system work?

The electronic cigarette is activated simply. After pressing the button 5 times, the blocking of energy supply to the connector is removed. When the tightening button is pressed, current from the battery is supplied to the coil. The wick moistened with liquid warms up and releases steam.

The button can give certain signals.

If the electronic cigarette does not turn on, but blinks three times, it means that the battery voltage and winding resistance are selected incorrectly. In another case, this may indicate damage to the electrical connections inside the case.

You cannot vape a vape with the wrong resistance. This leads to increased loads on the coil and battery. Most box mods do not turn on, but mech mods can be activated in this mode. Such a device will quickly burn out, and in the worst case, explode.

What if the electronic device does not turn on?

If the electronic cigarette does not turn on, the reason for this is mechanical damage. Among the main ones are:

How long can you smoke electronic cigarettes?

Even branded vapes are not designed for constant vaping. There is only one reason - overheating of the battery and coil. Taking continuous puffs is a direct path to burnt wicks and a burnt taste.

Typically, vapes are vaped with puffs at intervals of 30-40 seconds and subsequent delays of 5-10 minutes. This allows the case and battery to cool down. When high temperature energy consumption increases several times.

It is more convenient to work with a vape on box mods. The functions of the activation button and energy consumption are controlled automatically; nothing will turn on randomly. On the display you can monitor the voltage and capacity of the battery, as well as set the temperature limiter. If the device reaches critical level, the system will automatically turn off the device.

Is it possible to smoke an electronic cigarette while charging?

The button works in any mode, including when the vape is plugged into the charger. However, experts do not recommend getting carried away with such vaping. In this case, the load on the electronic cigarette doubles.

This increases the charge life and can lead to a short circuit.

How are disposable models turned on and off?

Mini and supermini cigarettes function automatically. There are configurations with a rechargeable battery and replaceable cartridges, but due to the small battery capacity, such devices are unpopular.

The cigarettes are equipped with a tip with a diode. When tightened, the light bulb lights up and supposedly imitates smoldering. real cigarette. The brighter the diode, the higher the battery charge. On average, mini and supermini devices are designed for 150-200 puffs. If the indicator dims, you won't be able to vape for long.

The amount of charge can also be determined by the intensity of vaping. As the amount of energy decreases, the puffs become less intense.

Smoking fur and boxing fashion is more profitable and a priority. Many people believe that constant switching on and off leads to rapid wear and tear on the button mechanics. This is only relevant for budget models.

Branded devices are equipped with durable spare parts and buttons with an insulated structure. This means that the element will not be damaged due to moisture, liquid, dust and impacts on a hard surface.

In contact with

Vaper's ABCs

Interest in vaping is gradually reaching more and more people. Some are interested in new technologies, others are attracted by fashion trends, while others are trying to get rid of addiction smoking.

Regardless of vaping experience, every vaper, when first acquainted with a gadget, is interested in how to use such a device and how to set up an electronic cigarette in such a way as to ensure high-quality, safe and at the same time pleasant vaping.

Before you figure out how to properly set up an e-cigarette, you need to find out why it is so important to properly organize this process.

An incorrectly configured device will not only not provide high-quality and proper vaping, but can also negatively affect the health of the vaper.

After all, an incorrectly adjusted tightening force or the volume of steam that enters the lungs can lead to both discomfort during vaping, and to the development of certain lung diseases and respiratory tract. Perhaps this is the greatest danger of an electronic cigarette, the settings of which do not meet the needs of the user.

In addition, an incorrectly configured device can simply break due to overload. If the vaper takes a deep puff and the mod’s power is not enough, the e-cigarette will either immediately fail or, what is much worse, explode right in the user’s hands.

As you can see, you need to set up an electronic cigarette as soon as the vaper is interested in this device as a device for vaping. The safety of the mod user and the quality of vaping depend on the correct adjustment of the device.

First introduction: how to turn on the electronics?

Congratulations, you have become the owner of your first electronic cigarette. Without exaggeration, your life will change in the near future.

What does a vape consist of and how does it work?

In the meantime, you need to make sure that you have everything you need for quality use of an e-cigarette:

• battery pack;
• clearomizer (atomizer, evaporator, steam generator) - this part is often sold complete with a battery (this kit is called a “starter kit”);
• charger (most chargers are equipped with a standard micro-USB connector);
• bottle with liquid for vaping.

Inexperienced vapers should pay attention Special attention to the atomizer. If you purchased a Starter Kit, it fits perfectly with the battery pack. If you want to purchase a clearomizer as a separate part of an electronic cigarette, you need to make sure that the type of connector on it matches the type of connector on the battery pack housing of the vaping device.

In addition, it is necessary to find out the possibility of servicing the atomizer (on a serviced evaporator you can on our own change the winding, while for maintenance-free ones you will need to replace the old spiral with a new, purchased one).

Don't know how to properly assemble a vaping device? With the help of further step by step instructions Anyone, even an inexperienced vaper, can assemble e-cigarettes on their own:

1. First of all, you need to make sure whether the atomizer is equipped with an evaporator (bowl with a wick).
2. Next you need to fully charge the battery pack.
3. After this, unscrew the atomizer, turn it over and fill it with vaping liquid through a special hole.
4. Finally, you need to install a steam generator filled with liquid on the battery pack.

That's it, your vaping device is fully charged and ready for vaping. It is extremely important to monitor the battery charge level and charge it in a timely manner. Otherwise, the battery pack may fail very quickly.

The charging frequency of an electronic cigarette directly depends on the capacitive characteristics of the battery pack. On average, every 1000 mAh is enough for about three hundred puffs. When the battery pack has a passthrough function, the vaper will be able to vape from it even while charging, without waiting for it to complete.

Setting up the mod to work correctly

This process largely depends on the model of the gadget used. We cannot know what kind of electronic cigarette you are using: a simple miniature “eGoshka” or a multifunctional, modern box mod. But be that as it may, be sure to read the information below on how to set up an electronic cigarette and implement vaping.

Adjusting an e-cigarette involves setting one or several parameters at once:

1. Power supplied to the steam generator (spiral winding).
   The larger the spiral (or the greater the number of spirals), the greater the power required to implement the tightening. The greater the power, the greater the amount of steam and the sooner the battery pack will discharge (the rate at which the battery discharges depends on its power).
2. Varivolt (VariVolt or VV).
   The ability to manually regulate the voltage, and the power depends on the winding resistance of the steam generator. The voltage is directly proportional to the volume of inhaled vapor.
3. VariWatt (VW).
   Possibility of adjusting power when changing resistance. This is a part with the help of which resistance is monitored and, depending on it, the voltage changes. With such a “function” in an electronic cigarette, there is no need to manually adjust the voltage. You just need to set the desired power.
4. Thermal control
   An automatic function that can also be added to an e-cigarette. With the help of this chip, the temperature of the steam generator is monitored, due to which, in fact, its regulation is realized. The presence of thermal control is characterized by a timely decrease or increase in the temperature of the evaporator, which greatly simplifies the use of the device for vaping.

In the first couples, you need to set the voltage based on your taste. To make adjustments, we will use the control buttons located on the battery pack. Experts recommend focusing on the desired amount of steam and ensuring that the liquid in the cartridge does not hiss or burn with a characteristic burnt taste.

Do you also need to be able to soar?

Additional article about vapes.

So, the vaping device is assembled, charged and configured. You can finally try and find out what vaping is like, which makes many people so delighted:

1. Turn on the electronic cigarette. To do this, you need to press the button located on the battery pack. The battery will supply voltage to the spiral winding and after a moment you can already inhale the first puff. True, there are also modern mods that turn on without a button. In such devices, the mechanism is activated when the steamer takes a puff.
2. We keep the electronic cigarette in vertical position or at an angle with the mouthpiece up. If you hold the device in a horizontal or upside-down position, it will not function at all.
3. If there are small holes on the body of the electronic cigarette intended for air exchange, it is not recommended to close them with your fingers while inhaling. These are incorrect actions that can lead to overheating and damage to the device.
4. The tightening is done simultaneously with pressing the button (this applies exclusively to “push-button” electronic devices and mods).
5. If you have just joined the ranks of vapers and do not know how to inhale steam correctly, then at first it is recommended to take a puff that is not too long (no more than 5 seconds). Between inhaling the vapor from the vape, short pauses are made - about 5 seconds. Let the atomizer cool down. He will thank you for your care with a longer service. In addition, this approach will ensure timely cooling of the coil and, thereby, prevent its overheating.
6. You need to tighten it smoothly. Vaping is different from regular smoking, which is why it is not recommended to take several puffs at once without a pause. Failure to follow this recommendation will result in liquid leakage through the steam generator and overheating of the coil.
7. When you are finished vaping, be sure to lock your e-cigarette before putting it in your pocket or bag. The locking method, as a rule, consists of pressing the button five times (although locking a gadget largely depends on its model and on the settings that were provided by the manufacturer).

Let's talk more about the advantages of vaping over smoking.

So, the first experience has been successfully obtained, the device has passed the first test, and you are ready to actively continue learning the basics of vaping.

When vaping, you should stick to the same intensity as when smoking regular cigarettes. Simply put, experienced vapers, as well as experts in the field, do not recommend taking more than 20 puffs at a time. The e-cigarette has no end, so an overdose is especially dangerous in the early stages of the debate. nicotine substances, present in the vaping liquid.

It is recommended to take breaks between cigarette breaks throughout the day. From too frequent use the storage tank will dry out very quickly in the part that comes into contact with the steam generator. During a break of an hour or two, the liquid has time to be evenly distributed throughout the cartridge.

If you can’t stand such long breaks, you can purchase a replacement cartridge. By the way, it will also be useful to the vaper when the vaper wants to change the taste of the liquid or its strength.

After all, there is always a little underused liquid left in the evaporator, so when using a new e-liquid of a different flavor, they will mix, which will not have the best effect on the taste of the vapor.

Most suitable way To avoid such a precedent is to use a separate clearomizer for each taste.

Vaping with pleasure

If you do not take a powerful, but long-lasting inhalation of steam, it will flow abundantly into the lungs. While too deep or sharp puffs can lead to the formation of excess fluid in the clearomizer, which can leak through the threads into the battery pack. Hence the malfunction of the gadget and, as a result, its breakdown.

In addition, many models, when taking strong and sharp puffs, begin to emit sounds uncharacteristic for this process: whistling, hissing. Do you need some extra noise? Thanks to long puffs, a large volume of steam enters the lung cavity, which means saturation will occur much faster than with small and abrupt puffs.

It is advisable to tilt the device for vaping slightly downward, then the liquid from the storage tank will flow into the steam generator gradually and evenly.

Experts strongly recommend monitoring the amount of liquid in the cartridge. It is highly undesirable to allow the filler to be empty during tightening. This may cause the wick to overheat and break. But at the same time, it is also not recommended to fill the e-liquid above the required level; this entails a leakage of the atomizer.

In addition, the steam generator of an electronic cigarette needs regular cleaning (at least once a month). This procedure is not complicated and can be easily organized at home without the involvement of more experienced vapers.

You just need to take it apart top part device into components and rinse the winding, bowl, wick, cartridge under running heat
oh water. At serious pollution You can wash the parts of your electronic cigarette in alcohol solution. But it’s better not to run the state of your gadget.

The frequency of replacing the atomizer mainly depends on the intensity of use of the vaping device. As a rule, experienced vapers change their vapor generator 1-2 times a month.

In addition, there are several rules that are considered good manners among vapers. For example, it is prohibited to leave an electronic cigarette unattended in the presence of children. And you can soar among people only with the consent of others. Taking a puff from a vape while driving vehicle– dangerous and not entirely reasonable. In a word, all the advice offered by experts and experienced vapers is quite logical and understandable without unnecessary reminders.

By following the rules for using a vaping device described above, you can significantly extend the life of the device. Proper vaping is more reminiscent of smoking a hookah than a regular cigarette. So just try it, learn how to use an electronic cigarette and enjoy vaping. Soar with pleasure!

Electronic cigarettes occupy the first place among new technologies. Despite the simple appearance, the vape device has its own characteristics. This is a complex device, the operating principles of which every user needs to know. The vape will last a long time if proper care and following some recommendations.

Electronic cigarette device

An electronic cigarette or vape is an inhaler that emits a large number of steam, which allows you to simulate smoking. The motive for the development of this device was initially the desire to help smokers who want to get rid of their addiction. But expectations were not met, and at the moment the device is used exclusively for entertainment purposes.

In order to use electronic cigarettes correctly, you need to understand how they work and what they consist of.

1. 1. Battery. It supplies the energy necessary to operate the vape, which means it needs to be charged periodically.
2. 2. LEDs. They create a glow and imitation of decay.
3. 3. Cartridge. This is a container with liquid for smoking.
4. 4. Atomizer (evaporator). Generates steam from liquid.
5. 5. Electronic chip. Controls the process of liquid evaporation.

If the cigarette contains a mechanical battery (with a button), this means that evaporation is controlled manually . While tightening, you must press the button. This method of smoking is inconvenient, so manufacturers came up with the idea of ​​equipping the device with an automatic battery.

The principle of operation of the vape is quite simple. As soon as the smoker takes a puff, the microprocessor automatically starts, which leads to the activation of the heating element. After which the liquid evaporates, which creates a large amount of steam. The steam enters the smoker's lungs and saturates them with nicotine. Despite the fact that there are a huge number of types of cigarettes, the principle of operation is identical for all.

Using the device

Before using an electronic cigarette, a smoker needs to ensure that he has a special liquid (refill) that serves as a source of vapor. There are a huge number of e-liquid options, but their main difference is the concentration of nicotine. Depending on this, they are divided into:

• nicotine-free;
• “Low” - light;
• "Medium" - average;
• “High” - strong;
• “Extra high” - increased strength.

Refueling and operating instructions

Before use cigarette needs to be refilled. Exist different ways refills.

• Method 1. Using a syringe with a large needle, the liquid is slowly injected into the cartridge, focusing on the volume of the reservoir.
• Method 2. Take out the cartridge, turn it over vertically and use a dispenser or pipette to pour the liquid into the reservoir.

In order not to cause harm to health, when operating the device you must follow the algorithm of actions and follow certain rules:

1. 1. The battery needs to be charged before use.
2. 2. Turn on the cigarette.
3. 3. Set the modes (optional, just take the first puff).
4. 4. Tightening should not be strong, as this may lead to damage to the atomizer.
5. 5. You can take no more than 13-16 puffs at a time, otherwise the indicator will signal the end of smoking.
6. 6. Vape can only be used in horizontal position(You cannot smoke while lying down). This is due to the fact that the liquid will not move in the desired direction.
7. 7. Avoid overheating the device. This may cause it to break.
8. 8. After smoking, you need to turn off the cigarette.

A vape of any type and brand may have operating features, so you must first carefully study the instructions.